UNBOX AND SET UP - YOUR GUIDE TO NEW SHOWER UNIT INSTALLATION

Unbox And Set Up - Your Guide To New Shower Unit Installation

Unbox And Set Up - Your Guide To New Shower Unit Installation

Blog Article

Call Us Now



Just about everyone has got their unique conception with regards to Simple ways to Install a Shower Cubicle on Your Own.


How to Install a One-Piece Shower Unit
A successful shower installation calls for cautious planning and also a great deal of work. In most cases, you will certainly need to do three types of tasks: framing wall surfaces, setting up the plumbing, and finishing wall surfaces.

Prep work


First of all, you should pick the sort of shower that you want to install. It is important to identify whether the selected shower is capable of coping with particular systems as well as can regulate a secure degree of water with the boiler. The majority of shower devices nowadays are developed to be adaptable to different water pressures (such as saved hot water and cool mains).
It is also vital to think about the water stress as well as the planning of the piping and water drainage for the shower

Various Kinds Of Shower Units


  • Push-on Mixer: The hose pipe and spray parts of the push-on mixer shower device can be linked to the bath faucet according to your requirement, and the water temperature can be readjusted by means of the taps. Push-on mixers are cheap and also very easy to install. Nonetheless, although the hose link is basic, it is easily displaced. Furthermore, it is inconvenient to readjust the temperature level.

  • Bath/Shower Mixer: The hose pipe and also spray of this kind of shower are combined with a bathroom mixer tap, and the temperature level can be readjusted with the bath faucets. It is a very economical choice and no additional plumbing is involved. Nonetheless, the bath/shower mixers likewise deal with troublesome temperature control choices.

  • Manual Mixer: The pipe and spray of a hand-operated mixer shower unit belong of the wall system and also the hot and cold water products are attached to a single shutoff The temperature and also pressure of the water are managed through either one or a range of handles (in much more pricey showers). Although temperature control is a lot easier in manual mixer kinds, they are more costly than the formerly discussed mixers. They additionally require extra plumbing of hot and cold water pipes.

  • Thermostatic Mixer: The hose as well as spray of this shower kind are a part of the wall device and the hot and cold water products are connected to a single valve below as well. It is full with a built-in stabiliser to self-adjust the water temperature level and to avoid it from becoming as well warm. One of the largest benefits of a thermostatic mixer shower type includes practical temperature level control. However, it is one of the most pricey of the different mixer alternatives.

  • Power Shower: A power shower is a single system having a powerful electrical pump that can altering both the water pressure and also temperature. This kind of shower can be fitted if there is water from a cold water cistern and a hot water cyndrical tube. A power shower makes the change of both pressure as well as temperature simple. On the other hand, it disagrees for water heated directly by the shower or where the water is provided by a combination boiler under keys stress.

  • Electric Shower: An electrical shower is plumbed into a mains cold water supply and also it heats the water electrically. It is essential to keep in mind that for this shower kind to be installed, the mains pressure needs to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The device allows the temperature and pressure to be changed by means of a handle. Versions with temperature stabilisers are better as they stay untouched by other taps somewhere else in operation within the house. A significant drawback of electric showers is that the control knob only enables the option of high temperatures at less stress, or lower temperatures at a greater pressure. This is troublesome in the winter when the spray is often weak and the mains water is chillier. Nonetheless, this trouble is tackled in some models which are offered with a winter/summer setup.


  • Approach


    Depending on the type of shower you wish to set up, the shower head need to either be suited order to prevent its contact with the water in the bathroom listed below or the base tray, or it needs to have a check shutoff.
    Before beginning, it is suggested to note the placements of the shower head and also control, and also to intend the pipe-work included. Furthermore, the drain system to eliminate the drainage will certainly require to be prepared. Both settings of the cable television path and the shower switch will certainly additionally require to be taken into consideration if a rapid or electrical shower device is being set up.
    Utilize the direction guide offered with the shower unit to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is essential to cut off the water supply. In order to protect the pipelines, they must be provided a waterproof covering and additionally fitted with separating valves. The pipelines can then be hidden into the wall and also glued over to neaten the overall appearance.
    Fit the base tray, shower head, as well as installations.
    Link the main shower control to the pipelines that will be providing the water (This might need a women screw thread adapter).
    Reconnect the water as well as examination the pipes for any kind of leaks, as some might require tightening.
    If you are setting up an electric shower, remember to switch off the electrical energy supply before making any type of electric links. Once these links have actually been made (there need to be guidance within the instruction manual), the power supply can be changed back on.

    Readjusting Water Stress to Suit Your Shower


    The cold water tank can be raised to a better height (in some cases as low as 150mm (6inches)) by installation a solid wood assistance beneath it - possibly composed of struts and blockboards. If you choose this option, the primary as well as circulation pipelines will also have to be raised to satisfy the brand-new elevation of the storage tank.
    Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is selected, it needs to be linked right into the power supply in order to run.

    Piping as well as Drain


    It is best to utilize 15mm diameter supply pipes, and make the runs to the shower as short and straight as feasible so regarding preserve optimal pressure as well as minimise warmth loss. In addition, by reducing using elbow joints for pipe corners, you can decrease the resistance in the circulation of the water. You can attain this by flexing the pipes instead.

    Most Common Blunders


  • Going against or neglecting regional code limitations.

  • Using pipes that are as well small.

  • Affixing copper to galvanized without utilizing a brass or dielectric fitting between both.

  • Not utilizing tape or pipe compound at threaded joints.

  • Not leveling your fixtures when mounting them.

  • Not mounting an air void loading for components.

  • Cutting supply stub outs too short to install the shutoff valves onto after the ended up wall surface remains in location.

  • Not correctly aligning tubing into fittings or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing is at an angle will cause a leakage.).

  • When transforming the water back on in your house, always run the outside tube shutoff or flush your bathrooms to bleed dirt and air from the lines. This particles can trigger problems in your sink faucets and also other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Install a One-Piece Shower Unit

    Do you enjoy more info about How to Install a One-Piece Shower Unit? Post feedback down below. We will be interested to find out your suggestions about this entry. In hopes to see you back again in the near future. Enjoyed reading our piece of writing? Please share it. Let other people locate it. Many thanks for going through it.




    Free Estimates


    Report this page